ZMM Haskovo Joybook R48 Series Service Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
12
PMOR3021S
PMOR3021B
PMOR3021R
CK = Check / RE = Replace
POSSIBLE CASE AND
DEFECTIVE PARTS
PROBLEM
TEST PROCEDURE
CONDITION
OFF
CONDITION
IDLE
CONDITION
MICROWAVE
COOKING
CONDITION
SENSOR
COOKING
CONDITION
Home fuse blows when power cord is plugged into wall receptacle.
Monitor fuse blows when power cord is plugged into wall receptacle.
Display does not illuminate when power cord is first plugged into wall receptacle.
Display does not operate properly when STOP/CLEAR key is touched. (The
time of day should appear on the display with beep sound during normal con-
dition.)
Oven lamp does not light with door is opened.
Hood fan motor operates when power cord is first plugged into wall receptacle.
Temperature of oven base seems more than 140°F (60°C) because of operation
of the range below. But hood fan motor does not turn on automatically. (Normal-
ly, food fan motor should be operating at low speed.)
Hood lights do not turn on when Light pad is pressed.
Hood fan motor does not rotate at all with touched Fan pad.
Speed of the hood fan motor does not change when the Fan Options pad is
touched for this function.
Oven lamp does not light in cook cycle. (But it does light when door is opened.)
Fan motor does not operate. (Oven lamp and strrer motor operate.)
Oven does not go into cook cycle when START pad is touched
Oven seems to be operating but little or no heat is produced in oven load.
(Food incompletely cooked or not cooked at all at end of cook cycle.)
Oven goes into a cook cycle but extremely uneven heating is produced in
oven load (food).
Variable cooking does not operate properly except Cooking Power 100% mode.
Stirrer motor does not operate. (Other parts operate.)
Oven goes into EASY DEFROST but food is not defrosted well.
The oven Stops and "ERROR" is displayed or does not end during Sensor
Cooking condition. (Oven does not shut off after a cup of water is boiling by
Sensor Cooking.)
Oven stops at 32 seconds after starting.
P NOISE FILTER
CK LOW VOLTAGE
CK NO POWER AT OUTLET
RE SHORTED IN POWER CORD
CK OPENED OR SHORTED WIRING
CK HOOD MOTOR CAPACITOR
RE HOOD LAMP OR SOCKET
RE STIRRER MOTOR
RE FAN MOTOR
RE OVEN LAMP OR SOCKET
O HUMIDITY SENSOR (R2120J)
N FOIL PATTERN ON P.W.B.
M EASY DEFROST
L RELAY (RY-4)
L RELAY (RY-3)
L RELAY (RY-5, RY-6)
L RELAY (RY-1)
K KEY UNIT
J CONTROL UNIT
I HOOD FAN MOTOR
H HOOD THERMAL CUT-OUT
G MONITOR FUSE
F MONITOR SWITCH
E
STOP SWITCH
D PRIMARY INTERLOCK SWITCH
D SECONDARY INTERLOCK SWITCH
C OVEN THERMAL CUT-OUT
B INVERTER UNIT
A MAGNETRON
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Comments to this Manuals

No comments